Products and Services
Facility Design and Construction > Surveillance > CCTV Systems > Guard Tour System
TS-G700 is our new RFID guard patrol system. It is metal body and moulded rubber shell.It can auto-read signal cards without key pressing and no any downloader required when
uploading patrol records to PC. What we need is just a USB port cable.
The biggest benefit is that it is no any key on surface of the reader,which is a totally water-proof, super anti-strike design.
Facility Design and Construction > Security > Access Control > Guard Patrol System
G100 Guard Tour System
G100 is a portable iButton reader designed for maximum durability in both indoor and outdoor applications.There are LED light and sound prompt when reading IButton successfully.
THE FEATHERS:
Super-reinforced aluminum-alloy case;
Shock-absorbent internal design;
Completely Waterproof,Sealed against liquids;
Firm and durable;
Auto prompt when working;
Warning when low voltage working;
Low-Power working,reading 160,000 cycles without charge;
Data storage safely,EEPROM Storage for 10years without power;
High reliable design.
Facility Design and Construction > Security > Monitoring > Guard Tour System
G200 Guard Tour System
G200 is a portable iButton reader designed for maximum durability in both indoor and outdoor applications.There are LED light and vibration prompt when reading iButton successfully.
The FEATHERS:
Super-reinforced stainless steel case;
Shock-absorbent internal design;
Completely Waterproof,Sealed against liquids;
Firm and durable;
Auto prompt when working;
Warning when low voltage working;
Low-Power working,reading 160,000 cycles without charge;
Data storage safely,EEPROM Storage for 10years without power;
High reliable design.Using long life components.
Facility Design and Construction > Security > Officers > Securiy Guard Patrol Tour System
G200 Guard Tour System
G200 is a portable iButton reader designed for maximum durability in both indoor and outdoor applications.There are LED light and vibration prompt when reading iButton successfully.
The FEATHERS:
Super-reinforced stainless steel case;
Shock-absorbent internal design;
Completely Waterproof,Sealed against liquids;
Firm and durable;
Auto prompt when working;
Warning when low voltage working;
Low-Power working,reading 160,000 cycles without charge;
Data storage safely,EEPROM Storage for 10years without power;
High reliable design.Using long life components.
Facility Design and Construction > Security > Key Control Systems > iButton of Touch Memory Key
TS1990A iButton Memory
In a sense, all iButtons are memory buttons because there are no iButtons without memory. Therefore, the concept of a mobile memory chip that communicates by touch remains fundamental to all iButtons. As the iButton family has grown, however, memory only iButtons are now distinguished from iButtons with extended capabilities such as a microprocessor, clock, and/or environmental sensors. Memory iButtons come in these different types to allow you to pick the right device for your specific application.
All memory iButtons have these characteristics:
Unique and unalterable factory-lasered address;
Low-cost, low-power 1-Wire? interface;
Ability to operate as mobile database, in either standalone or networked application designs.
Memory iButtons can be divided into the following different categories:
The Address Only iButton is our TS1990A and is our basis model. It contains 64bits of Read Only Memory (ROM) and is used in many different applications such as:
Access Control as a Key;
Route Compliance as a Location Identifier;
Inspection and Maintenance for Equipment Identification;
TS1990A is compatibale with DS1990A-F3/F5 completely.Because TS1990A also use DS2401 chip that DS1990A uses.
Facility Design and Construction > Security > Locks > Smart Key of TS1990A iButton
TS1990A iButton Memory
In a sense, all iButtons are memory buttons because there are no iButtons without memory. Therefore, the concept of a mobile memory chip that communicates by touch remains fundamental to all iButtons. As the iButton family has grown, however, memory only iButtons are now distinguished from iButtons with extended capabilities such as a microprocessor, clock, and/or environmental sensors. Memory iButtons come in these different types to allow you to pick the right device for your specific application.
All memory iButtons have these characteristics:
Unique and unalterable factory-lasered address;
Low-cost, low-power 1-Wire? interface;
Ability to operate as mobile database, in either standalone or networked application designs.
Memory iButtons can be divided into the following different categories:
The Address Only iButton is our TS1990A and is our basis model. It contains 64bits of Read Only Memory (ROM) and is used in many different applications such as:
Access Control as a Key;
Route Compliance as a Location Identifier;
Inspection and Maintenance for Equipment Identification;
TS1990A is compatibale with DS1990A-F3/F5 completely.Because TS1990A also use DS2401 chip that DS1990A uses.
Facility Design and Construction > Security > Access Control > RFID cards and tags
RFID Tags and cards
The EM4100 (previously named H4100) is a CMOS integrated circuit for use in electronic Read Only RF Transponders. The circuit is powered by an external coil placed in an electromagnetic field, and gets its master clock from the same field via one of the coil terminals. By turning on and off the modulation current, the chip will send back the 64 bits of information contained in a factor y pre-programmed memory array. The programming of the chip is performed by laser fusing of polysilicon links in order to store a unique code on each chip. The EM4100 has several metal options which are used to define the code type and data rate. Data rates of 64, 32 and 16 periods of carrier frequency per data bit are available. Data can be coded as Manchester, Biphase or PSK. Due to low power consumption of the logic core, no supply buffer capacitor is required. Only an external coil is needed to obtain the chip function. A parallel resonance capacitor of 74 pF is also integrated.
TK4100 is compatible. EM4169/T5567/T5557 or custom chip is available.
Electric feature:
64 bit memory array laser programmable
Several options of data rate and coding available
On chip resonance capacitor
On chip supply buffer capacitor
On chip voltage limiter
Full wave rectifier on chip
Large modulation depth due to a low impedance modulation device
Operating frequency: 125kHz
Very small chip size convenient for implantation
Very low power cons
Applications: Bank, school, enterprise ,access control, parking system
Physical feature:
A)Card material: PVC, polyester, ABS, PET, PETG, combination
B) Card size: CR80 (54 x 85. 6mm), CR50, custom size
C) Options: hole punch, signature panel, loco or hico mag. strip, foil, hologram image, embossing letter and number
D) Color: white glossy, white matte, full color or custom design
E) Chip available: EM,TK, Mifare, utralight, UCODE, ICODE, Simens, Temic, AT series etc.
F) Applications: certificate ID card, access control, transportation, library, parking,door lock etc.
shipping weigh: 0.006kg/pcs
Disclaimer:
The picture related to this product are provided for reference only.
We do not have intellectual property rights over the trademark(s).This/these trademarks are not contained when displaying or selling.
 |
| Headquarters |
7E Hongfuge,Caifu Mansion,Caitian Road
Futian District
Shenzhen, Guangdong 518033
China
|
|
|
|
| Phone: |
+86 755-2108 6303 |
| Fax: |
+86 755-2108 6303 |
| Website: |
www.topsecu.com |
| Email: |
info@topsecu.com |
| |
| Marketing: |
Ms. Susan Zhang, International Marketing Manager |
|
susan@topsecu.com
|
|
| Additional Information |
| Date Established: |
September, 2001 |
|
|